got runtime error

A place for discussion about QMT, get answers and chat with the author. This is a good place for ideas and problem solving. So come on in and make your posts now.

Moderator: Shift_E

got runtime error

Postby sc1949 on Fri Mar 04, 2005 11:01 am

Hi Mate, I tried to start QMT and got a "runtime error 430" - "Class does not support automation or does not support expected interface".

I had latest version I thought, downloading 1.8.8 at the moment to see if it was a bad D/L. Any idea what this is? Thanks in advance
sc1949
Air Cadet Level 2
 
Posts: 8
Joined: Sat Feb 12, 2005 12:15 am
Location: Brisbane Australia

Re: got runtime error

Postby Shift_E on Fri Mar 04, 2005 1:50 pm

sc1949 wrote:Hi Mate, I tried to start QMT and got a "runtime error 430" - "Class does not support automation or does not support expected interface".

I had latest version I thought, downloading 1.8.8 at the moment to see if it was a bad D/L. Any idea what this is? Thanks in advance


I do know what is causing the error. Try uninstalling from the Control Panel Add/Remove programs, then reinstall.

If that doesn't fix the problem then we'll try a different method of registering the "dll" QMT is needing.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby sc1949 on Fri Mar 04, 2005 2:13 pm

Just tried with Add/Remove, and guess what! It's not listed. I'll install the new version in the morning (it's 12.30 AM here), and i]I'll get back to you. Thanks Shift_E
sc1949
Air Cadet Level 2
 
Posts: 8
Joined: Sat Feb 12, 2005 12:15 am
Location: Brisbane Australia

Postby Shift_E on Fri Mar 04, 2005 2:21 pm

sc1949 wrote:Just tried with Add/Remove, and guess what! It's not listed. I'll install the new version in the morning (it's 12.30 AM here), and i]I'll get back to you. Thanks Shift_E


Sorry, I mis-read your first post. Version 1.8.8 when installed will be added to the Add/Remove Programs. Installing version 1.8.8 should fix the error 430. :)

Good night,
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Now its VAC

Postby sc1949 on Sat Mar 05, 2005 2:35 am

After last nights message about QMT, I deleted it, then reinstalled with 1.8.8, and that worked fine. Just now I was going for a fly, hit my VAC (which was working perfectly yesterday), and got the same message for it IE "runtime error 430" "class does not support automation or does not support expected interface".

What is going on? I suppose I could reinstall that, too, but you said you probably knew what was causing this.

What do you suggest? Also VAC is not showing in Add/Remove either, As QMT wasn't last night, but is now.

Thanks Shift_E for your help, and also your wonderful programs.
sc1949
Air Cadet Level 2
 
Posts: 8
Joined: Sat Feb 12, 2005 12:15 am
Location: Brisbane Australia

Re: Now its VAC

Postby Shift_E on Sat Mar 05, 2005 5:10 am

sc1949 wrote:After last nights message about QMT, I deleted it, then reinstalled with 1.8.8, and that worked fine. Just now I was going for a fly, hit my VAC (which was working perfectly yesterday), and got the same message for it IE "runtime error 430" "class does not support automation or does not support expected interface".

What is going on? I suppose I could reinstall that, too, but you said you probably knew what was causing this.

What do you suggest? Also VAC is not showing in Add/Remove either, As QMT wasn't last night, but is now.

Thanks Shift_E for your help, and also your wonderful programs.


Both QMT and VAC share the same utility dll, I had updated both programs because I updated the dll. Since you are on version 1.8.8 of QMT it means you are on a version lower than 1.5.0 on VAC.

If you don't want to upgrade VAC, you'll have to fall back to an early version of QMT.

Sorry about that, :oops:
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby sc1949 on Sat Mar 05, 2005 5:28 am

I'm on 1.4.? of VAC, hadn't checked for later as having no probs. Will get newest now. Thanks for clearing that up.
sc1949
Air Cadet Level 2
 
Posts: 8
Joined: Sat Feb 12, 2005 12:15 am
Location: Brisbane Australia


Return to Quick Mission Tuner (QMT)

Who is online

Users browsing this forum: No registered users and 1 guest

cron