Shift_E I have two problems

A place for discussion about VAC, get answers and chat with the author. This is a good place for ideas and problem solving. So come on in and make your posts now.

Moderator: Shift_E

Shift_E I have two problems

Postby Rattler on Fri Nov 10, 2006 2:58 am

got the program full version and registered. downloaded f4af and lockon. put in profile. I am getting a SAPI error and and error 2147467259. i use a cyber acoustics head set , windows xp sp2 and the sound card is sound blaster live. Any ideas. :?:
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Re: Shift_E I have two problems

Postby Shift_E on Fri Nov 10, 2006 6:33 am

Rattler wrote:got the program full version and registered. downloaded f4af and lockon. put in profile. I am getting a SAPI error and and error 2147467259. i use a cyber acoustics head set , windows xp sp2 and the sound card is sound blaster live. Any ideas. :?:


A specific registry in incorrect/corrupt. You need to re-register MSScript.ocx. In Windows, click Start, Run and enter: regsvr32 msscript.ocx. Click OK. It should come back with message: DllRegisterServer in msscript.ocx succeeded. Reboot you machine. Restart VAC.

Let me know if this works.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Shift_E

Postby Rattler on Fri Nov 10, 2006 3:18 pm

Got it to recognize commands but it appears keyboard keys are not the same as mine for Falcon4af. I downloaded the file from the profile list so I guess I will have to check the keyboard keys out. The first problem was I never had a ms voice recognition engine. Got that fixed . Tried commands in F4af but different things happened so it does recognize me I just got to get the keyboard looked into. I have a logitech navigator itouch keyboard. Thanks for your quick response. I will look into keyboard, if you have any advice on this I will take it gladly. VAC will work fine just got to tweak it.Cheers.
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Postby Shift_E on Fri Nov 10, 2006 4:36 pm

Hi Rattler,

Sounds like you are up and running. While you start out using VAC I'd recommend turning the PTA and/or PTD keys off. Also, make sure you run through at least one voice training session, you'll be happy you did. To get VAC more accurate results with VAC you can follow the three short steps at http://www.dwvac.com/vactips.htm.

Enjoy,
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Shift_e

Postby Rattler on Fri Nov 10, 2006 5:01 pm

I have checked the key commands and they are the same so I do not know why f4af will not work correctly. I tried the voice training but nothing shows up but my mic is active. I got to be doing something wrong cause I know your software works. Just got to figure it out.
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Shift_E

Postby Rattler on Fri Nov 10, 2006 7:27 pm

I have made a profile f4af and added the first 4 wingman commands. At times they match and when I test again they do not mach. This is a simple w1 w2 w3 w4 and also tries typing the numbers no difference. I am not stupid but this has me drove nuts. I should be able to click on one of those simple commands and have it match.
what am I missing.
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Postby Shift_E on Sat Nov 11, 2006 12:28 am

Hi Rattler,

Send me the profile you are working on and I'll look it over.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Profile

Postby Rattler on Sat Nov 11, 2006 2:45 am

Shift_E wrote:Hi Rattler,

Send me the profile you are working on and I'll look it over.




e-mail on it's way my friend.

Pete(rattler)
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Shift_E

Postby Rattler on Sun Nov 12, 2006 12:14 am

Tried everything I can think of but it still says that the engine is not present. I download sdk5.1 and I get the mic but I still have problem making f4af follow the proper commands. I even downloaded mssr51.exe which should be the engine but my computer does not recognize it. I'm at a loss. Don't know what to try next. :?:
Rattler
User avatar
Rattler
Lance Air Corporal
 
Posts: 23
Joined: Fri Nov 03, 2006 5:25 pm

Postby Shift_E on Sun Nov 12, 2006 3:19 pm

Hi Rattler,

The full download version of VAC has everything needed to install VAC and the MS Speech Engine. The Microsoft SDK and mssr51.exe contain the same install modules used in the VAC full install.

I sent you an email on how to proceed to the next step.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm


Return to Voice Activated Command (VAC)

Who is online

Users browsing this forum: No registered users and 4 guests

cron