Multiple Commands - One Activation Phrase

A place for discussion about VAC, get answers and chat with the author. This is a good place for ideas and problem solving. So come on in and make your posts now.

Moderator: Shift_E

Multiple Commands - One Activation Phrase

Postby mag_maverick on Tue Jan 31, 2006 7:48 am

No success in getting VAC to issue multiple commands with one phrase for IL2-FB+AEP+PF.

If I issue the verbal command "Ground Control Vector Home Base", keyboard commands are Tab...8...2. I've programmed VAC with Command 1 = Tab, Command 2 = kb8, and Command 3 = kb2. What I get in IL2 is "Permission to Land. Other multiple command phrases do not execute any actions. For example, "Wingman cover my six" would be Tab...1...1. I've programmed VAC with Command 1 = Tab, Command 2 = kb1 and Command 3 = kb1. I get no response in IL2. I've tried various Durations and Pauses without success. I have got these combinations to work with other voice activated/control programs for IL2. What am I doing wrong to make this work. I am using the keyboard numbers...not the numpad numbers for these commands.

Thanks...MM
mag_maverick
Lance Air Corporal
 
Posts: 22
Joined: Sat Jan 21, 2006 9:27 pm
Location: San Antonio, Texas

Postby Shift_E on Tue Jan 31, 2006 8:07 am

Hi MM,

Are you using a PTA key? If so, set it to none and try it again.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby Sky Dancer on Tue Jan 31, 2006 8:24 pm

1) Are you using the TOGGLE function?

2) Do the 8 and 2 have to be NUMBER PAD or can you use the ones above the main keys?

3) Are the numbers 8 & 2 pressed together or pressed and released in sequence?

Try one of the following

For Number Pad 8 and 2 pressed and released in sequence:

Command 1 TAB (Toggle box Checked)

Command 2 NUM8 (Toggle box UNchecked)

Command 3 NUM2 (Toggle box UNchecked)

Command 4 TAB (Toggle Box UNchecked)


If TAB and 8 are HELD while 2 is pressed and released, try this:

Command 1 TAB (toggle box Checked)

Command 2 NUM8 (Toggle box Checked)

Command 3 NUM2 (Toggle box UNhecked)

Command 4 NUM8 (Toggle box UNchecked)

Command 5 TAB (Toggle Box UNchecked)

IF the numbers 8 & 2 were above the main keys and pressed in sequence, you could shorten the command list like this

Command 1 TAB (toggle box checked)

command 2 8 2 (both entered in the character Key(s) ) box, (Toggle box UNchecked)

Command 3 TAB (toggle box UNchecked)

One of the above methods should be what you are looking for, most probably Method 1.

Good Luck
Bob "Sky Dancer" Skidmore
Sky Dancer
Corporal
 
Posts: 25
Joined: Fri Jan 20, 2006 3:32 pm

Multiple Commands - One Activation Phrase - Fixed

Postby mag_maverick on Wed Feb 01, 2006 6:13 am

Thanks for the feedback Shift_E and Sky Dancer

The problem was it was very late or early and my brain must have went to sleep. What I did was create an Action Description and use the "Duplicate" feature to create the additional Action Descriptions. I failed to edit the action phrases. After correcting each action phrase they all worked as designed.

Thanks...MM
mag_maverick
Lance Air Corporal
 
Posts: 22
Joined: Sat Jan 21, 2006 9:27 pm
Location: San Antonio, Texas


Return to Voice Activated Command (VAC)

Who is online

Users browsing this forum: No registered users and 3 guests

cron