Burning engines

Moderators: CrazySchmidt, EURO_Snoopy, MaXMhZ, MudPuppy

Burning engines

Postby b9 on Tue Aug 07, 2007 4:24 pm

Brilliant 1946. What a simulation....

Is it me or... I keep burning up my engines on the He 162 and Me 262. I usually give the engine a good burn on take off to cruising height/speed, ease off, then increase speed to close with my target. At this point a nice little message appears "engine on fire" and I think to myself, "I didn't do it, so who did?"

Is it me?
Just get the damn thing off the ground, and FLY...!
b9
Air Cadet Level 2
 
Posts: 8
Joined: Sat Jul 14, 2007 10:38 pm
Location: Newark, Blighty

Postby MaXMhZ on Tue Aug 07, 2007 5:01 pm

Be carefull to adjust throttle slowly on any jet.
Keep an eye on your RPM indicator(s) to see if the engine is keeping up. If it does not, adjust throttle slower.
Also don't throttle back and then up again. You run a big chance of blowing up the engine.
It takes a while but you'll develop a feel for it.
If you change throttle too fast an engine fire will result.
On takeoff no more than 85% throttle (8000 RPM) is needed. Taxi using 6000 RPM
Image

Waste no more time arguing what a good man should be. Be one.-Marcus Aurelius
NWS Online Shop
User avatar
MaXMhZ
Site Admin
 
Posts: 1188
Joined: Fri Dec 10, 2004 11:23 am
Location: NL

Postby b9 on Wed Aug 08, 2007 10:13 pm

MaXMhZ many thanks for your advice. Every bit helps.

Cheers
Just get the damn thing off the ground, and FLY...!
b9
Air Cadet Level 2
 
Posts: 8
Joined: Sat Jul 14, 2007 10:38 pm
Location: Newark, Blighty


Return to IL-2 Forgotten Battles/Pacific Fighters Forum

Who is online

Users browsing this forum: No registered users and 3 guests

cron