Vac not hearing me??

A place for discussion about VAC, get answers and chat with the author. This is a good place for ideas and problem solving. So come on in and make your posts now.

Moderator: Shift_E

Vac not hearing me??

Postby Aceweepop on Wed Aug 15, 2007 7:30 pm

In vac builder using test phrase it hears everyone perfect,but in game or even in keyboard tester nothing,its gone deaf!!! WHAT am I missing???
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

Postby Shift_E on Wed Aug 15, 2007 7:40 pm

Hi Aceweepop,

Is the profile using a PTA or PTD key assignment? If so, disable it. Make sure you re-load the profile in VAC System after saving in VAC Builder and before re-testing.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby Aceweepop on Wed Aug 15, 2007 8:57 pm

PTA and PTD set to none and yes reloaded after saving!!!
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

Postby Shift_E on Thu Aug 16, 2007 2:04 am

And did that work?
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby Aceweepop on Thu Aug 16, 2007 6:33 pm

Hi Shift_E
I have done some more testing and this is my finding:-

If in VAC builder I leave PTA set to none then profile goes deaf,ie not activated even though loaded and swiched on.

I then assign anything to PTA ,save profile,reload and switch on,then activate with assigned key and it works. It continues to work if I then remove assignment ,save, load, and switch on. But if I exit VAC system and then come back profile is deaf,ie not activated.

Basically I am saying I cannot activate my profile unless I use a PTA command. Is this normal????
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

Postby Shift_E on Thu Aug 16, 2007 6:43 pm

Hi Aceweepop,

No, that is not normal. It sounds as though something is wrong in the profile. Could you email the profile to me and I'll look it over, it's the easiest way for me to diagnose.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby Aceweepop on Thu Aug 16, 2007 10:55 pm

Not sure how to do that,do I use PM if so how???
I am not very good with forumspeek
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

Postby Shift_E on Thu Aug 16, 2007 11:14 pm

Use my support email address in the help file.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

email

Postby Aceweepop on Fri Aug 17, 2007 12:53 pm

OK just done that :)
PS where's the help file?? I got your email from my outlook messages in the end.
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

Postby Shift_E on Fri Aug 17, 2007 1:52 pm

Hi Aceweepop,

I meant get the support email address from the help in the Builder, sorry about that.

I see that you are using the toggle switch with the PTA and you said it works fine, but if you set the PTA to NONE then VAC will no longer send commands. You found a bug, VAC does not clear the toggle mode when you set the PTA key to NONE. The work around is to set the switch to DEFAULT first, then set the key to NONE.

I'll get that fixed in the next update.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm

Postby Aceweepop on Fri Aug 17, 2007 4:40 pm

:D Thanks Shift_E That works a treat,so easy when you know how!
:oops:
I like swotting bugs 8) :smt096
Aceweepop
Lance Air Corporal
 
Posts: 19
Joined: Wed Aug 01, 2007 6:25 pm
Location: Scotland

I think I have the same problem...

Postby graves_09 on Mon Oct 01, 2007 5:30 pm

I have no trouble taking to the computer, I went through the windows tutorial last night with no problem. I then loaded my profile to VAC and turned it on and got nothing. If I hit test, it recognizes the phrase, but it will not work if i use key tester, note pad, etc. I previously had PTA command but removed it from this profile. I have read the other bug report and work around (I will try it tonight) but I was wondering if the patch you referred to is on its way anytime soon.
Also I tried making a new profile with just one test phrase and I had the same problem. Could it also be contributing to the issue that I used VAC 1.8.5 for XP to create the original profile and now i am using VAC 2.whatever for vista?
Thanks for your help.
graves_09
Air Cadet Level 1
 
Posts: 1
Joined: Mon Oct 01, 2007 5:22 pm

Postby Shift_E on Wed Oct 03, 2007 1:09 pm

Hi Graves,

If your phrases are being recognized in the Builder then VAC should be working for you and we are missing a step.

From your post it sounds like you are not running VAC System. VAC is two programs, the Builder that creates and maintains your profiles and the System that you use your profiles with. If you are running both programs and make changes in the Builder, be sure to reload the profile in the System.

I’m still working on the update, I wished I could say how long soon is, but I can’t. My best guess is about a month and that depends on how work goes.
:)

Your profiles will work in either XP or Vista, it doesn't matter with VAC.
Shift_E

Quick Mission Tuner
http://qmt.webhop.net
Voice Activated Command
http://www.dwvac.com
Shift_E
Utilities Developer
 
Posts: 505
Joined: Sun Dec 12, 2004 5:49 pm


Return to Voice Activated Command (VAC)

Who is online

Users browsing this forum: No registered users and 1 guest

cron